Our purpose-built dedicated production facility has a powder blending capacity of up to 1,000kg plus grading and packing to manufacture your products.
From pilot scale batches through to full production runs, we offer powder blending produced to your specification, or developed to your brief by our skilled technical team. It is all managed with total confidentiality.
In our dedicated 600 square metre powder facility, we have the capability to blend numerous powder products with a capacity in excess of 10te/day. We are also able to pre-blend liquids into absorbent powders.
FacilitiesThree stainless steel horizontal ‘U trough double helix’ blenders with a capacity ranging from 250kg to 1,000kg, catering for both hazardous and low hazard products. All ancillary equipment is available to facilitate safe and dust free movement of blended powder into the finished pack.
ProcessAs well as general blending and mixing, we are able to grade products and pack into a variety of containers, from 1,000kg bulk bags, through 10 – 25kg buckets and sacks, down to 500g jars.
MarketsSome of the products made in this facility include construction products, animal feedstuff additives, dairy farm cleaning, household cleaning, metal processing and many more.
Case Study 1
“The client is a manufacturer of silicone base ingredients for use in cosmetics and industrial applications, but its headquarters are not based in the UK and its UK plant is not conducive to the manufacture of highly flammable materials.”
Case Study 2
“An existing client wanted to upgrade one of their UK based facilities that provided chemicals in bulk for the food and brewing sectors, but needed to continue servicing their clients while the engineering work was underway.”
Case Study 3
“During Tube Store retrieval operations at it’s site, the client became aware of accumulations of contaminated water residing in some of the tubes. This was a complex and programme critical project that required an innovative solution.”
Case Study 4
“Following a factory fire, the original client needed a new manufacturing plant – and fast – for the manufacture of domestic / retail wood treatment products. This emergency response was a complex project due to the low flashpoint of the products and the need to produce a retail-quality product.”
Case Study 5
“The client prints designs on t-shirts and uses a liquid conditioner to cure inks within the printing process. The original supplier of the conditioner (and manufacturer of the equipment) was overseas and the local agent ceased supply to the UK, resulting in a cost and continuity issue, so the brief from the client was to develop an alternative liquid”
Case Study 6
“As a manufacturer of printing inks, the client handles a number of solvents on site to clean the equipment between products and needs to ensure that there is no contamination. It then must manage this waste product in the most environmentally-friendly manner.”