FLOCCULENT BLOCKS

Rutpen’s Flocculant Blocks have been specially developed to slowly dissolve directly into the effluent flow in question and flocculate the associated suspended solids. Typically used either directly in the effluent stream to be treated or suspended in a wire mesh basket under an outfall if the effluent has been concentrated into a pipe-work system

The Rutpen FLOCCULANT BLOCK Range offers the choice of both synthetic anionic and cationic flocculants. Our A9 grade is better where the effluent to be treated is strongly acidic or alkaline, but if the stream is near neutralA10 may be a better choice. Both grades are nontoxic to aquatic life. In contrast, the C11 grade is the cationic option and it does exhibit toxicity towards fish, so care should be take not to discharge it to watercourses.  
The FLOCCULANT BLOCKS are provided in the form of a solid block which has been developed to slowly dissolve in the effluent flow and flocculate suspended solids. It is ideally suited for remote locations where electricity and mains water are not available.

FLOC BLOCK A10

£215.00£1,080.00

FLOC BLOCK A9

£215.00£1,080.00

FLOC BLOCK C11

£235.00£1,170.00
Shopping Cart